Bathtub and Tile Refinishing
Tired of looking at your stained, discolored bathtub and tile?
We will refinish your standard bathtub for aesthetic improvement, color change, or to match a new color scheme.
Realtors and appraisers agree that a white bathtub and tile scheme adds value to your bathroom and your home! A bathtub that is approximately 60 in. x 30 in. with one to three sides against a wall is considered to be standard.
I would not have believed it if I had not seen the results! My bathroom looks like it's been totally redone, and for less than $1,000.00!Ginny P., Ann Arbor
How Does It Work?
We use an exclusive bonding agent called Powerbond that causes a molecular bond between the original tub and the new coating. During the refinishing process your bathroom will be covered in plastic to protect it from overspray. We use an air exhauster during the process to remove overspray and most of the smell from the room.
Steps Taken to Refinish a Bathtub
The bathtub is scrubbed clean with a powerful detergent that will remove any soap film build-up or residual film left behind by household cleaners.
The tub is rinsed and dried completely to remove all moisture.
Paper masking is installed around the tub to prevent overspray from getting on the tiles. Other areas of the bathroom will be masked off with plastic if necessary.
Bonding agent is applied to the surface of the tub.
High Gloss Acrylic Urethane topcoat is applied
During our resurfacing process, a ventilator is used which helps remove overspray and fumes from the bathroom area. It pulls the air from the room and with it the overspray and dust particles. This piece of equipment is placed in the window of the bathroom, or if there is no window in the bathroom, a hose is attached and directed to the nearest window or door. All materials are applied using an HVLP spray system.